porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5354 > < Initial Inspection and Diagnostic Overview|Page 5352
Page 18
background image

The following functions can be run using this menu item:

-

Antenna diversity test

-

Set tuner frequency

-

Reset

-

Wakeup sequence of the MOST system

Voice Control System (VOCS)

The VOCS is designed as a module box which can be pushed into the PCM2 (optional). After the insertion, an electronic switch is opened and the
module is integrated into the MOST ring.

Drive Links

Drive links of the PCM2 can be activated with this menu item. This allows the function of the drive links to be assessed very quickly.

The following drive links can be activated with the Porsche System Tester II No. 9588:

-

Left balance

-

Central balance

-

Right balance

-

Bass - maximum value

-

Bass - minimum value

-

Bass - centre position

-

Rear fader

-

Middle fader

-

Front fader

-

MOST power reduction

-

MOST switch

-

Mute

-

MOST bus switch

-

Output switch

-

Treble - minimum value

-

Treble - centre position

-

Treble - maximum value

-

Volume - maximum value

-

Volume - minimum value

-

Volume - centre position

NOTE:  The activated drive link is automatically switched off after approximately 20 seconds.

PCM2 Control Module (Head Unit)

The PCM2 control module (head unit) includes the following components:

Internal:

-

PCM2 gateway

-

PCM2 Man Machine Interface (MMI)

-

Internal amplifier (optional, depending on the equipment)

-

Tuner

-

Single CD

-

Navigation (optional/insertion)

-

VOCS (voice control system) (optional/insertion)

-

Controller Area Network (CAN) Comfort

-

MOST switch

External:

-

External amplifier (optional, Harman or BOSE)

-

CD changer (CDC), (optional)

-

Telephone/telematics (optional)

The PCM2 consists of at least two but a maximum of four MOST nodes, (Gateway, MMI and Navigation and VOCS (optional)), which communicate
with each other electronically via the MOST. Data is transferred outside of the PCM2 via the optical MOST.

Telephone/Telematics

The telephone/telematics feature is available as an option and is linked to the PCM2 via the optical waveguide.

Initial Inspection and Diagnostic Overview|Page 5354 > < Initial Inspection and Diagnostic Overview|Page 5352