porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5429 > < Initial Inspection and Diagnostic Overview|Page 5427
Page 93
background image

If a match is found, the device is operational. No further checks are made while the device is connected to the vehicle electrical system.

If no match is found, the device switches off after 30 seconds and the 'PROTECTED' message appears in the display. The device is not operational.
Coding of the PCM2 (from IPAS ) must be carried out.

CDR23 Tools

CDR23 Tools

DANGER:

Danger of injury through triggering of driver's airbag

-

Never hang the Porsche System Tester II No. 9588 over the steering wheel.

-

Always place tools and special tools outside the functioning range of all airbags.

NOTE:  Plug contacts are optimally designed to suit the plug system. Operations on pins can cause contact problems. Only use suitable measurement
tools, adapter plugs and test cables.

The following testers are required for vehicle diagnosis:

Porsche System Tester II No. 9588

Commercially available digital multimeter

Measurement tool set No. 9684

Initial Inspection and Diagnostic Overview|Page 5429 > < Initial Inspection and Diagnostic Overview|Page 5427