Boxster (986) F6-2.5L (1998)
-
Insert the pre-assembled connection-piece with steering lever -30- into the tension bow -31- and fasten with the fastening screws -32-.
The connecting-piece contains a clip in which the pin of the steering lever engages and thereby produces the position "tension bow closed" or
"tension bow open" (service position).
15. Fitting the connection-piece with steering lever
NOTE: Use assembly grease when fitting the pins.
1. Position the tension bow -31- with the connection-piece and steering lever -30- on the main bow -20- and join with the pin dia. 8 x 25.
2. Press the retaining clips -19- into the pins.
16. Installing steering lever
Position the steering lever -30- on the convertible-top support -5- and join the parts with the pin dia. 8 x 30.
Press the retaining clips -19- into the pins.
17. Installing the tension cable