Boxster (986) F6-2.5L (1998)
Fuel Return Line: Service and Repair
WARNING:
Danger of fire and injury!
>
Observe general safety regulations on the fuel system.
>
Wear protective gloves.
Removal
1. Move convertible top to service position.
2. Detach negative terminal of battery (a/f 10 mm).
3. Place protective cover on ground.
4. Remove engine compartment lining and lid.
5. Remove rear wall lining and rear wall cover
6. Raise vehicle and remove engine underside guard.
7. Unclip fuel return line from the line holder on the body.
8. Detach the fuel return line.
Press unlocking buttons and simultaneously pull off the line. Immediately seal the fuel line supports with a suitable plug.
9. Lower vehicle.
10. Remove holder for servo return line, electrical plug connection and ground strap. (Hexagon-head bolt M6 x 12)
11. Undo return line (wrench size 17); simultaneously counter (wrench size 19).
Remove return line.