Boxster (986) F6-2.5L (1998)
Tools
Assembly:
1.
Preparatory work
1.1
Remove right front seat --> POSES Workshop Manual Serv. No. 7201 "Removing front seat'.
1.2
Remove center console --> POSES, Workshop Manual, Serv. No. 6817 -"Removing center console".
1.3
Remove gearshift bracket.
1.3.1 Put gearshift lever in neutral.
1.3.2 Remove locking clips --> Figure 3 -A_ on support --> Figure 3 -B-.
1.3.3 Pull support --> Figure 3 -B- upwards out of the gearshift bracket.
Note
Do not loosen the locking sleeves --> Figure 4 -A- of the shift and selector cable.
1.3.4 Lever off shift cable --> Figure 4 -B- at the gearshift lever.
To do this, insert a large screwdriver through the side opening in the gearshift bracket and press end of shift cable down off the ball head.
1.3.5 Remove protective cap --> Figure 4 -C- and pull off selector cable --> Figure 4 -D-.
1.3.6 Unscrew nuts --> Figure 5 -A- and remove gearshift bracket.