Boxster (986) F6-2.5L (1998)
Transmission Position Switch/Sensor: Service and Repair
Removing and installing multi-function switch
Removal
1. Hold engine by transport shackle in installed position with special tools 10 - 222A and 9591/1.
2. Remove the left catalytic converter.
3. Detach selector lever cable from deflection lever and transmission support.
4. Place transmission jack under the transmission.
5. Remove the left transmission support with hydraulic mount.
Note The fastening nut M12 (C) must not be loosened. The transmission support will otherwise be damaged.
6. Release and disconnect cable connection to multi-function switch.