porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5668 > < Initial Inspection and Diagnostic Overview|Page 5666
Page 98
background image

All control units connected to the MOST are in sleep mode if the PCM2 is deactivated. When the PCM2 is switched on, a 'light' is switched on via the
MMI. It is reinforced and passed on by the MOST control modules that are connected.

PCM2 MMI Tools

Tools - MMI

DANGER:

Danger of injury through triggering of driver's airbag

-

Never hang the Porsche System Tester II No. 9588 over the steering wheel.

-

Always place tools and special tools outside the functioning range of all airbags.

NOTE:  Plug contacts are optimally designed to suit the plug system. Operations on pins can cause contact problems. Only use suitable measurement
tools, adapter plugs and test cables.

The following testers are required for vehicle diagnosis:

Porsche System Tester II No. 9588

Commercially available digital multimeter

Measurement tool set No. 9684

Initial Inspection and Diagnostic Overview|Page 5668 > < Initial Inspection and Diagnostic Overview|Page 5666