Boxster (986) F6-2.7L (2000)
Removal
1. Switch off ignition. Remove cover -A + B- and battery cover.
2. Remove spare wheel.
3. Remove brake booster -C- - Go to "Removing and installing brake booster".
Note!
^
The brake master cylinder -B- and the hydraulic unit -D- must be removed to remove and install the brake booster -C-.
^
The assembly of the brake master cylinder -B- with the brake booster -C- must not be disconnected for removal and installation if both parts
should be continued to be used!
4. Remove battery -1- (necessary to remove intermediate piece -11-)! Remove alarm horn on the intermediate piece -11-.
5. Undo intermediate piece -11- -arrow- (2 M8 nuts and hexagon socket head bolt) and remove in the direction of the battery. Unclip air conditioning
line -2- from the holder.
6. Remove the bellows -1- on the fire wall and the bellows -2- on the brake booster. Pull off the grommet (rubber groove ring) -3-.