Boxster (986) F6-2.7L (2000)
/f6-2.7l/Page-362006.png)
10. Fit special tool, holding-down device 9624, on the cylinder head. Fasten holding-down device with a hexagon-head bolt M8 x 30.
11. Remove cylinder-head cover. Loosen the hexagon-head bolts from the outside to the inside. Detach cylinder-head cover by tapping lightly with a
plastic hammer.
12. Additionally fasten a holding-down device of special tool 9611 using M6 x 45 auxiliary screws.
13. Relieve camshaft tensioning element with special tool, tensioning screw 9632. Screw tensioning screw in only until the chain is slightly relieved.
14. Unscrew three fastening screws (M6 x 95) for tensioning element.
15. Affix auxiliary chain tensioner (screw in by approx. 3 turns). Undo four hexagon-head bolts (M6 x 15) on the chain sprocket. Remove auxiliary
chain tensioner again.
