Boxster (986) F6-2.7L (2000)
5. Undo cable (C) at other side and use an open-ended wrench to turn the hexagon of the cable.
Installation
1. Install in reverse order.
Tightening torques: Cable to motor and cross member = 23 Nm (17 ft. lbs.).
2. Fit the two rubber spoilers to the sheetmetal brace if necessary.
Fasten front sheetmetal brace (2 screws on rear axle cross member).
Tightening torque = 46 Nm (34 ft. lbs.).