Boxster (986) F6-2.7L (2000)
3. Enter old DME programming code, >>, confirm with F7 key.
4. Specify transmission type, >>, code with F8 key.
5. Select the required program map and confirm with the >> key.
6. The tester shows whether the data status is current or not current.
7. Proceed further according to the tester instructions.
-
Programming Map As Of 7.8 min
Under the heading -DME, Control unit programming, Control unit type- it is possible to check whether the data record for this vehicle is
up-to-date or not.
In the case of -Not up-to-date- the data record can be updated with -Program map-. The prerequisite is that a customer complaint has been
submitted or that Porsche AG has arranged for this to be done in the context of a campaign.
In the case of -Up-to-date- the data record and the version are displayed.
Version (Data Records)
NOTE:
-
Please note that not all variants are separately listed in this chapter. This document should provide the contents of the data records.
-
Extended contents can be listed in the tables.
-
The listed tables are included in the software status 13.0, Porsche System Tester. Therefore, higher software versions may feature extended or
deviating contents.
-
The diagnosis software no. (see table) is not needed as of PST2 software 12.1.