porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Impact Sensor|Service and Repair|Page 5026 > < Contact Unit|Page 5022
Page 1
background image

Impact Sensor: Service and Repair

Removing and Installing Sensor For Side Airbag

Remove sensor for side airbag

NOTE:

-

Sensors for triggering the side airbag unit are fastened on the inner lower side member on the left and right-hand sides in the vehicle.

-

After an accident, the sensor of the triggered side airbag unit must be examined for damage, if necessary.

-

The sensor must be replaced after the side airbag has been triggered for the third time

-

Safety conditions must be observed when handling airbags. Refer to "Safety regulations for vehicles with airbag and belt tensioner".

-

Remove front seat.

-

Remove the side lining at rear.

-

Remove sill.

1. Disengage floor covering at the support and lay it in the vehicle interior.

Impact Sensor|Service and Repair|Page 5026 > < Contact Unit|Page 5022