Boxster (987) F6-2.7L (2006)
NOTE: The fastening clips have two settings. Before installing the front door trim panel, the fastening clips must be loosened fully because otherwise
the door trim panel may not engage fully into the door unit carrier, possibly resulting in noises. The fastening clips must be pulled to the front position.
1. Check fastening clips -1- for deformation; replace if necessary.
Checking The Fastening Clips
2. Pull fastening clips -1- to the front position so that they are fully loosened.
Installing actuating cable for door lock
Main Illustration For Removing And Installing Door Trim Panel
1. Engage pin -2- of the actuating cable and swivel to the left by 90 degrees -Arrow A-.
Engaging Actuating Cable
2. Insert T-tread of fastening clip -1- into the square hole -Arrow B-.
3. Push fastening clip -1- forward and lock the locking hook.
Locking electrical plug connection