Boxster (987) F6-2.7L (2006)
/f6-2.7l/Page-1142005.png)
3. Tighten fastening screws -1-. Tightening torque Final tightening: 10 Nm (7.5 ftlb.)
Subsequent work
1. End service position. Refer to Convertible top service position.
2. Check gap dimensions for convertible top, adjust if necessary. Refer to Diagram - body gap dimensions.
INFORMATION: Only for vehicles with hardtop.
3. Install hardtop. Refer to Removing and installing hardtop.
INFORMATION: Only for vehicles with hardtop.
4. Adjust hardtop. Refer to Adjusting hardtop.
Subsequent work
INFORMATION: Only for removing/installing or replacing convertible-top peg mount.
Install sun visor. Refer to Removing and installing sun visor.
