Boxster (987) F6-2.7L (2006)
/f6-2.7l/Page-1221003.png)
5. Release electrical connector -A- and unplug it.
Installing instrument cluster
1. Position the instrument cluster, connect the electrical plug and lock.
2. Screw down instrument cluster with both fastening screws -1-.
Tightening torque: 1.7 ftlb.
3. If a new instrument cluster was installed.
Subsequent work
Reworking instrument cluster
Install trim for steering column.
Programming instrument cluster
Reading and printing values
INFORMATION:
-
If the instrument cluster is replaced or exchanged, the instrument cluster must be programmed and coded using the PIWIS Tester 9718. This is
done to adapt the instrument cluster to the vehicle and equipment.
-
If possible, before the instrument cluster is removed and replaced, a read-out of the vehicle data should be obtained using the Porsche System
