porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 1006 > < Procedures|Page 1004
Page 4
background image

Installation position of TPM antenna

Notice
Voltage peaks

Risk of damage to load or to the control unit

-

Remove the ignition key and switch off load before disconnecting or removing load.

1. Release -arrow A- and pull off -arrow B- connector.

Pulling off connector

2. Remove transmitter (trigger) for tire pressure monitoring system (TPM).
2.1.

Release the holder -1- using a screwdriver -arrow A-.

2.2.

Remove transmitter (trigger) for TPM from the holder -arrow B-.

Procedures|Page 1006 > < Procedures|Page 1004