porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3555 > < Procedures|Page 3553
Page 24
background image

13. Unclip the main wire harness in the area of the rear left spring strut.
14. Release rear window heating plug connection -53- and disconnect it.
15. Release connector on hood mechanism -54- and pull it off.
16. Pull off connector on front seat-belt pretensioner at the left and right -56 and 57-.

17. Unclip main wire harness to the left side wall.

17.1. Unclip main wire harness to the left side wall -arrow A-.
17.2. Unclip cable duct to the left side wall -arrow B-.

18. Loosen cable duct to the left side wall.

18.1. Unclip main wire harness to the bottom of the B-pillar -arrow A-.
18.2. Take out cable duct upwards out of the rear wall plate -arrow B-.

19. Release and pull off connector for airbag sensor, centre left and right -58 and 59-.
20. Release and pull off connector for ParkAssist control unit -60 and 61-.
21. Release and pull off connector for control unit for rear convenience systems -62 to 64-.

22. Loosen ground point under the driver's seat -65-.

22.1. Screw off fastening nut and remove ground straps.

Procedures|Page 3555 > < Procedures|Page 3553