Boxster (987) F6-2.9L (2010)
3.2.1 Unclip the standard microphone (e.g. BOSE sound system, coding: black) -->Figure 15-1-from the trim panel.
3.2.2 Clip sound microphone/hands-free microphone (coding: white) -->Figure 16-2- and hands-free microphone (coding: light blue)
-->Figure 16-1- into the trim panel.
4
Concluding work
4.1 Fit new tie-wraps -->Figure 17 -1- on trim panel under the dashboard.
4.2 Install trim panel under dashboard (driver's side).-->Workshop Manual '701919 Removing and installing trim panel under dashboard'
4.3 Install PCM3.0.-->Workshop Manual '911019 Removing and installing PCM display and operator control unit
NOTICE
Voltage drop
-
Risk of irreparable damage to control unit
-
Risk of damage to control unit
-
Fault entries in the control unit
-
Coding in the control unit is aborted
-
Malfunctions in control unit, even during programming
-
Switch off the ignition and remove the ignition key before disconnecting the control unit.
-
Ensure that the power supply is not interrupted during programming.
-
Connect a battery charger with a current rating of at least Nominal value 40 A to the vehicle battery.
INFORMATION