Boxster S (986) F6-3.2L (2001)
17. Fit the parking assistant control module to the new cover -1- with the fastening screws and insert both plugs into the control module. Pay attention
to the new installation position.
18. Insert the tilt sensor -3- into the cover -1- and screw the cover tight to the floorpan using the fastening screws -arrow-.
19. Lay the lead under the cover, making sure that no electrical lead can be caught when the seat is operated.
20. Install the seat.
21. Make sure the system is functioning properly with the Porsche System Tester.
Tools