porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4473 > < Initial Inspection and Diagnostic Overview|Page 4471
Page 61
background image

CAUTION:

Danger of damage due to improper handling of the battery and the control unit connectors.

-

Never disconnect battery with engine running.

-

Never start engine without securely connected battery.

-

Never pull off or push on plug connections for the control modules or other electronic components when the ignition is switched on.

General Information On The Fault Memory

Fault Code setting conditions

Fault Codes can be set in several circumstances, e.g.:

-

battery disconnected

-

plug connections disconnected

-

power failure

In these circumstances, no fault is present in the system and the fault memory must be erased.

Fault memory Info key [F8]

In order to be able to assess the fault exactly, the fault memory Info key F8 must be pressed. This information should be saved using the Save key F4 and
printed out. If a fault code is stored with "not present" status and no other problems are present, then the fault memory must be erased.

Fault type - Frequency counter/Temperature/Voltage;  Speed/Time of occurence

Supply voltage fault type

The display shows which fault type has occurred:
-

Undervoltage '< 9 V'

-

Overvoltage '> 16 V'

Frequency counter

When a fault first occurs, a fault entry is made in the fault memory and the counter is simultaneously set to 50.
If a fault is present, the counter is incremented by 1 for each "ignition on". The maximum count is 255.
The counter is decremented if the fault is no longer present. The fault memory is automatically erased when the counter
reaches 0.
If the error occurs again when the counter is between 1 and 49, the counter is reset to 50.

Temperature:

The value indicates the temperature (temperature sensor in the gateway) at the time the fault occurred. The temperature of
the fibre optic transmitter is monitored:  max 85 degree C.

Voltage

The value indicates the voltage at the time the fault occurred.

Vehicle speed

The value indicates the vehicle speed at the time the fault occurred.

Units

The following selection is available:

-

RoW/degree C/litre/km

-

UK 0 degree C/gal/mph

-

USA 0 degree F/gal/mph

Vehicle Type Vehicle Coding

The following selection is available:

-

Not coded

-

911(996)

-

911 Turbo (996)

-

Boxster (986)

-

Cayenne

-

987

-

997

Vehicle Version Vehicle Coding

The following selection is available:

-

Not coded

-

Coupe

Initial Inspection and Diagnostic Overview|Page 4473 > < Initial Inspection and Diagnostic Overview|Page 4471