Boxster S (986) F6-3.2L (2001)
NOTE:
-
Inner door handle variant A is installed in vehicles up to the following Veh. Ident. Nos.:
-
98 ZXS 6O O819 RoW
-
98 0XS 62 0195 USA
-
98 8Xu 62 2717 USA
Removal and installation of bowden cable variant A
Cut open tie-wrap -1- when removing the door trim panel. Unclip bowden cable from the door handle.
1
-
Engage bowden cable in the door handle. The bowden cable must always be set free of play. When installing the door panel, secure
with a tie-wrap -1- around the door handle -2- and the bowden cable -3-
Refer to Removing and installing inner door release (bowden cable) for door lock
Installation note for door sealing film
Installation note on door sealing film for vehicles without side airbag
The spare door sealing film comes with 4 holes for fastening the side airbag. For vehicles without airbag the holes in the door sealing film -2- must be
covered with commercially available adhesive tape -1-
Notes on the installation of partly detached door sealing films
Door sealing films which have become completely detached or are torn must always be replaced.