Boxster S (986) F6-3.2L (2001)
Rear Cross-Member: Service and Repair
Crossmember
Removing and Installing Rear Axle Crossmember
Removal
1. Lift the vehicle. When lifting, ensure that the fastening screws (C) of the right and left diagonal braces (B) are still accessible.
2. Remove underbody cover at rear (No. 5).
3. Undo the fastening screw (C) and the collar nuts (D) and remove the diagonal brace (B) together with the holder (E).
4. If the diagonal brace is to be replaced, detach the holder from the diagonal brace and fit it on the new brace.
Note The right and left-hand diagonal braces are identical parts.