Boxster S (986) F6-3.2L (2001)
1. Press in Teflon bushings -14- in the bore of the drive lever on both sides.
2. Position the B-pillar -15- on the convertible-top support -5- and join it with the pin -18- dia. 8 x 45.
3. Press the retaining clips -19- into the pins -18-.
9. Installing main bow
NOTE: Use assembly grease when fitting the pins.
1. Position the main bow -20- on the convertible-top support -5- and drive lever -16-. Then join with the pins, dia. 8 x 70 -21- and dia. 8 x 45
-18-,
2. Press the retaining clips -19- into the pins -18, 21-.
10. Fitting the roof frame on the B-pillar
NOTE: Use assembly grease when fitting the pins -18-.
1. Press in Teflon bushings -14- in the bore of the B-pillar and push bar on both sides.
2. Fit the pre-assembled B-pillar -15- in the roof frame -22- and connect with the pins dia. 8 x 45 -18-.
3. Secure the pin -18- with a clip -19-.
11. Fitting convertible-top lock