Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-1443011.png)
14.1. Position stop -30- on the corner bow and screw down using the fastening screws -31-.
15. Installing corner bow
15.1. Press in Teflon bushings -14- in the bore of the corner bow on both sides.
15.2. Position corner bow -33- on the main bow -20- and join with the pins -18-.
15.3. Press the retaining clips -19- into the pins -18-.
16. Fitting the connection-piece with joint on the tension bow
16.1. Press in Teflon bushings -14- in the bore of the joint on both sides.
16.2. Position joint -34- on the main bow and join with the pins -18-.
16.3. Secure the pin -18- with a clip -19-.
INFORMATION: Before removal, mark the longitudinal adjustment from the connection-piece to the tension bow on the connection piece
using a scriber.
17. Fitting connection-piece
17.1. Insert the connection-piece -35- into the tension bow -36- and fasten with the fastening screws -37-.
INFORMATION: Use assembly grease when fitting the pins.
18. Installing tension bow
18.1. Position the tension bow with the connection-piece -35- on the link -34- and join with the pin 8 x 25 -18-.
18.2. Press the retaining clips -19- into the pins -18-.
19. Installing the tension cable
