Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-313025.png)
Installation position of the chain tensioners
(engine in installed position)
10. Fit caps (6 ea.) for camshaft bores.
Installation
1. Clean receiving bore; remove any silicone material emerging. Manually fit new cap dry and press in as far as it will go.
Completing Camshafts
Completing camshafts
Preassembling camshafts
The inlet camshaft, exhaust camshaft, tensioning element (VarioCam) and chain must be pre-assembled before installation in the cylinder head.
Camshaft allocation
Camshafts of cylinder bank 1 - 3
