Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-215008.png)
4. Slowly and carefully open the coolant expansion tank.
5. Unscrew the coolant drain plug on the engine and drain and collect the radiator cleaning agent. Disposal should be carried out according to the
country-specific legal requirements.
6. Pull the radiator supply and return lines off the engine. To do so, undo the hose clamps, carefully pull off the hoses and allow the remaining liquid
to run out.
7. Rinse away any adhering oil in the coolant expansion tank with hot water.
8. Connect the hoses again and tighten the hose clamps.
9. Tighten drain plug on the engine with a tightening torque of 10 Nm (7.5 ft. lbs.) to 15 Nm (11.0 ft. lbs.).
10. Fill the coolant circuit with water only and then bleed the cooling system according to the regulations.
11. Start engine.
12. After the vehicle has been bled and the coolant temperature is > 80°C, let the stationary vehicle run at medium speed for at least 15 minutes.
