Boxster S (986) F6-3.2L (2001)
13. The following message appears on the screen:
"Input new programming code"
Input new DME programming code and press the double arrow key [>>].
14. The following message appears on the screen:
"Please confirm input"
Confirm input with the [F7] key.
15. The following message appears on the screen:
Input new immobilizer code"
Input immobilizer code and press the double arrow key [>>].
16. The following message appears on the screen:
"Please confirm input'
Confirm input with the [F7] key.
17. The following message appears on the screen:
"Select data record"
Select data record according to the allocation table and press the double arrow key [>>].
The control module will now be programmed. Programming will take approx. 5 minutes.
WARNING:
>
Never interrupt the programming process
18. The following message will appear after the programming time has elapsed:
"Programming was completed successfully"
Press the double arrow key [>>], switch the ignition off and then on again.
This completes programming of the DME control module
WARNING:
Risk of damage if allocation is incorrect!