Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-1073002.png)
WARNING: Danger of material damage and personal injury when the threads are being repaired.
-
Thread repairs are only permissible on the front axle pickup point bushing, engine mount pickup point, and front, rear, and V-strut rear
axle pickup points listed.
-
Repair of threads on the front axle front is not permitted.
-
Repair of threads for the front axle, rear pickup point fastening point, up to and including model year 1998, is not permitted.
-
As of model year 1999, repair of threads on the front axle, rear pickup point is permitted.
INFORMATION: The repair bushing must be installed lowered. To mill in the respective shoulder, the tool with the designation Spot facer for
time-sert thread repair M10 or M14 must be used. The tool provided from the complete set must not be used in this case.
INFORMATION: While pressing in the base threads, a noticeably larger amount of force on the screw-in tool is required to form the inner threads.
Pressing is finished when the screw-in tool can be further turned more easily.
Tools and materials
