Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-767002.png)
5. Unscrew the fastening screws for the ATF cooler with a Torx T30 (3/8 inch) screwdriver insert.
Note If necessary, use a mirror when unscrewing the top two screws.
Installation
1. Replace toroidal sealing rings and coat with ATF.
2. Check and top up ATF.
3. Top up engine coolant level and bleed system.
Tightening torques
ATF cooler to port plate (M6) = 10 Nm, (7.5 ft. lbs.)
