Boxster S (987) F6-3.2L (2005)
Disconnect optical waveguide connection point -> Figure 5 -B-.
6.2.2 Remove connection point holder -> Figure 5 -A- from plenum panel using pointed-nose pliers.
6.3
Only for vehicles with optical waveguide components in the front luggage compartment:
Pull off protection cap -> Figure 6 -A- on optical waveguide.
6.4
Route optical waveguide from optical waveguide Connection point -> Figure 7 -A- along the front panel to the navigation unit installation
position -> Figure 7 -B- and possibly to the amplifier -> Figure 7 -C- or CD changer and secure at this position.
6.5
Secure connection point holder to the front panel and join optical waveguide connection point.
6.6
Only for vehicles with optical waveguide component:
Permanently secure standard optical waveguide. This remains functionless in the vehicle.
6.7
Only for vehicles with Tire Pressure Monitoring control unit:
Insert Tire Pressure Monitoring control unit and tighten fastening screws. -> Workshop Manual '443419 Removing and installing Tire