Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-1010003.png)
2. Release the electrical connectors -4, 5- and unplug them.
3. Undo the two fastening screws -2-.
4. Pull out holder for CD changer -1- toward the front from both fastening parts -4- and take off.
Installing CD changer
INFORMATION: If a new CD changer is installed, the adjusting screw must be in position H.
1. Replace retaining clips for CD changer retaining frame.
2. Insert the CD changer into its retaining frame and screw down tight with the six fastening screws -6-. - Tightening torque: 2.5 Nm (2 ft. lbs.)
