Boxster S (987) F6-3.2L (2005)
1. Screw in fastening screws -1- at the bottom on the front apron -2- and tighten to the specified torque. Final tightening: 2.8 Nm (2 ftlb.)
2. Check gap dimensions on lid, wing and main headlight. If necessary, unscrew fastening screws and adjust the gap dimensions by moving the front
spoiler. Refer to Diagram - body gap dimensions
Subsequent work
Install front section of front wheel housing liner on the left and right. Refer to Removing and installing front wheel housing liner
Install cover for lock mount. Refer to Removing and installing lock mount cover
Removing and Installing Retaining Strip For Front Apron
Removing And Installing Retaining Strip For Front Apron
Technical values