Boxster S (987) F6-3.2L (2005)
INFORMATION: To fit the door handle correctly, the return spring must be hooked into place prior to installation.
1. Position door handle -2- on door trim panel and secure with fastening screws -1-. Tightening torque Final tightening: 1.5 ftlb.+0.1 ftlb.
INFORMATION: Pull the door handle carefully to check that the return spring is fixed correctly.
Subsequent work
1. Install door trim panel. Refer to Removing and installing door trim panel.
Removing and Installing Inner Door Opener
Removing and installing inner door opener
Technical values
Preliminary work
1. Remove door trim panel. Refer to Removing and installing door trim panel
Removing inner door opener