Boxster S (987) F6-3.2L (2005)
5. Unhook the tool -1- and remove it.
INFORMATION: Pull carefully on the lock actuation to check that it is secured in installation position. Repeat the steps listed above if
necessary.
Installing door lock
Fitting the bowden cable
1. Insert bowden cable into the actuating lever -arrow C- and swivel by 90 degrees -arrow B-.
2. Clip bowden cable into the door lock -arrow A-.
Installing door lock
INFORMATION: To prevent a malfunction in the closing system, make sure that the closing cylinder shaft is fitted correctly in the door lock.
1. Insert door lock -2- into the door and secure with the fastening screws -1-. Tightening torque, Final tightening: 13 ftlb.+1.5 ftlb.