Boxster S (987) F6-3.2L (2005)
Front Door Window Motor: Procedures
645419 Removing And Installing Power Window Motor
Tools
Installation Position Shown On The 997
Removing power window motor
1. If a new power window motor is to be installed, read out the values first.
Switch off ignition and remove ignition key.
2. Unlock electric connector -a- and disconnect from power window motor.
Release Connector -A- And Remove
3. Unscrew the three fastening screws -1-.
Unscrew Fastening Screws -1-
4. Pull the power window motor out of the teeth.
Installing power window motor
1. Position power window motor and push into the teeth.
2. Screw in the three fastening screws. Tightening torque 2 ftlb.
Screwing In Fastening Screws -1-