Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-1088001.png)
Body Emblem: Procedures
Removing and Installing Front Logo
660719 Removing And Installing Front Logo
Removing front logo
1. Open front lid.
2. Unscrew fastening nuts -3-.
Removing Front Logo
3. Remove logo -1- and washer -2-.
Installing front logo
1. Insert washer -2- and logo -1- into lid and secure with new fastening nuts -3-.
Installing Front Logo
2. Close front lid.
Removing and Installing the Rear Logo
665019 Removing And Installing The Rear Logo
Tools
Removing the rear logo
1. Heat the rear lid
1.2. Heat the rear lid -1- in the area of the logo -2- using the hot-air gun v.a.g 1416-3-.
Heating Logo
2. Lifting up the logo using a plastic wedge
