Boxster S (987) F6-3.2L (2005)
2. Unscrew fastening screws -2- and remove side section trim panel -3- -Arrow B-.
Removing front side section trim panel (passenger's side).
1. Partly loosen carpet -1- at the bottom in the area of the A-pillar -Arrow A-.
2. Unscrew plastic nuts -2- and remove side section trim panel -3- -Arrow B-.
Installing front side section trim
Installing front side section trim panel (passenger's side)
1. Position side section trim panel -3- -Arrow A- and screw down with the plastic nuts -2-.
2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B- Double-sided adhesive tape or suitable adhesive.
Installing front side section trim panel (driver's side)
1. Insert side section trim panel -3- einsetzen -Arrow A- and screw down with the fastening screws -2-. Tightening torque: 2.0 ftlb.