Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-1206001.png)
Seat Cover: Procedures
722619 Removing And Installing Cover For Backrest
Removing cover for backrest
Preliminary work
1. Remove front seat.
2. Remove control module trim panel.
Removing cover for backrest
Installation Location For Backrest Cover
1. Unscrew fastening screw -1- laterally out of the backrest cover 2.
Unscrewing Fastening Screw Laterally
2. Unscrew lower fastening screw -1- out of the backrest cover 2.
Unscrewing Lower Fastening Screw
3. Pull out the backrest cover -2- in the direction of the arrow and pull out the clip A upwards out of the seat frame -3- at the same time.