Boxster S (987) F6-3.2L (2005)
Pulling Out Backrest Cover
Installing cover for backrest
1. Insert the backrest cover -2- in the direction of the arrow and insert the clip A upwards over the seat frame -3- at the same time.
Inserting Backrest Cover
2. Screw down the backrest cover -2- with the fastening screw -1- from below. Tightening torque 2 ftlb.
Screwing Down Lower Fastening Screw
3. Screw down the backrest cover -2- with the fastening screw -1- laterally. Tightening torque 2 ftlb.
Tightening The Fastening Screw Laterally
Subsequent work
1. Install control module trim panel.
2. Install front seat.