Boxster S (987) F6-3.2L (2005)
Brake lines on brake master cylinder
3. Remove the hydraulic unit -D- together with the support -F- and the four brake lines, which are fitted on the intermediate piece -E-.
A - Brake fluid reservoir
B - Brake master cylinder
C - Brake booster
D - Hydraulic unit
E - Intermediate piece
F - Support for hydraulic unit
Brake components
Information
The brake master cylinder must not be separated from the brake booster if both parts are to be re-used.
4. Undo the fastening nuts -1- on the brake master cylinder. Pull out brake master cylinder.
1 - Brake master cylinder mount
2 - Brake booster mount
Brake master cylinder mount