Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-372005.png)
7. Push spring band clamps on to radiator flanges and fit radiator hoses to the flanges. Move engaged spring band clamps into installation position
and loosen using a water-pump pliers (use a screwdriver as well, if necessary) and then fasten again -arrows-.
8. Fit radiator vent line to the flange -1- and clip vent line into the plastic holder -2-.
9. Connect cable plug for fan motor -arrow-.
Subsequent work for installing radiator
1. Fit air guide in front of radiator.
