Boxster S (987) F6-3.2L (2005)
Overview, hydraulic valve for valve lift adjustment (Vario Cam Plus version)
5. Remove spark plugs.
6. Remove oil suction pump for cylinders 1 - 3. Unscrew four Torx screws M6 x 20 (micro-self-locking), remove oil suction pump, and replace
O-ring and screws.
Oil suction pump for cylinders 1-3
7. Remove tandem pump for cylinders 4 - 6. Unscrew four Torx screws M6 (micro-self-locking) -1-. Pull off the vacuum line on pump -2-. Remove
pump and replace O-rings and micro-self-locking screws.
Tandem pump side 4-6
Removing camshaft - engine removed
Removing camshafts
Caution
Risk of damage due to particles of dirt.
^
Danger of material damage due to blocked oil bores/oil ducts.
-->
Absolute cleanliness is essential when working on the engine.
-->
Lay removed engine parts on a clean base and make sure to cover them.