Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-283013.png)
Gear carrier in crankcase half 1-3
9. Screw in and tighten two additional screws for fastening the gear carrier to cylinder side 1-3, replace O-ring. -Arrows-. --> Tightening torque: 22
Nm (16 ftlb.)
Additional screws for gear carrier 1-3
10. Screw in and tighten another cylinder-head screw with spacer sleeve 9613 -Arrow- on the belt pulley side. --> Tightening torque: 20 Nm (15 ftlb.)
Auxiliary screw with spacer sleeve 9613
11. Unscrew special tool retaining device 9607 from gear carrier.
12. Install piston.
