Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-290006.png)
4. Insert new piston-pin circlip in the taper of the assembly aid 9603/1. Position the cylindrical part on the assembly tube of the special tool assembly
tool 9602/1.
5. Press circlip into assembly tube using the assembly aid 9500/3.
6. Position assembly tube on piston eye and press piston-pin circlip into the ring groove using the pressure pin assembly tool 9602/1. The circlip
must audibly engage.
7. Check installation position and secure fit of circlip. The lug of the circlip must always be touching the contact surface running in the direction of
the oil piston shank opposite the piston ring grooves.
8. Repeat steps for pistons/connecting rods on cylinders 2 and 3.
Piston markings
