Boxster S (987) F6-3.2L (2005)
Threaded joint for coolant pump
3. Remove coolant pump.
Installing coolant pump
Installing coolant pump
1. Carefully remove remains of gasket from sealing faces; do not use sharp-edged tools.
2. Fit new seal on the coolant pump.
Seal for coolant pump
3. Fit coolant pump to crankcase and secure with seven Torx screws, two M6 x 30 and five M6 x 25. Tighten screws --> Tightening torque: 7.5 ftlb.
Threaded joint for coolant pump
4. Coat inside of coolant hoses with Kluber Plus (obtainable from Porsche Parts Catalogue), push onto the connection pieces and position spring
band clamps -1, 4-.