Boxster S (987) F6-3.2L (2005)
Administrative Procedure:
See Attachment "C"
Tools
Attachment "A"
VIN List
Use the VIN range previously shown as a general guideline. The VIN can be checked in the Porsche e-DCS/WWS for confirmation of an open recall
campaign. Also, the VIN can be checked via the VRU (Voice Response System) for any open listing.
Work Procedure: Attachment "B"
Install washers on both clamps on the exhaust system bracket.
1.
Lift vehicle with platform lift according to instructions in --> Workshop Manual '401000 Lifting the vehicle'.
DANGER:
Parts of the exhaust system become extremely hot!
^
Danger of burns
^
Permanent scarring of the skin
--> Do not begin work until the exhaust system has cooled down completely.
--> If it is imperative that you work on the hot exhaust system, ensure that you wear fire-resistant and heat-resistant protective gear.
2.
Install two washers on the left clamp on the exhaust system bracket.
2.1
Unscrew hexagon-head bolt (--> Figure 1-Item A-) on the left clamp.