Boxster S (987) F6-3.2L (2005)
/f6-3.2l/Page-1244015.png)
2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.
Removing and Installing Instrument Cluster
902519 Removing And Installing Instrument Cluster
Tools
Preliminary work
Preliminary work for instrument cluster
Remove trim for steering column.
Removing instrument cluster
ATTENTION:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.
-
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery charger
with a current rating of at least 40 A to the vehicle battery.
-
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
1. If a new instrument cluster is to be installed, read out the values if possible from the instrument cluster.
2. Loosen the steering wheel adjustment, put the steering wheel in the front-most and lowest position and lock the steering wheel adjustment.
3. Unscrew the two fastening screws -1-.
Unscrewing Fastening Screws
4. Pull instrument cluster forward, push side panels -2- to the side.
5. Release electrical connector -A- and unplug it.
