Boxster S (987) F6-3.2L (2005)
1. Unscrew fastening screw -3-.
2. Push a screwdriver into the openings -A- and unclip the four clips holding the cover -1-.
3. Release and unplug both electric connectors -A- and disengage the left and right electric lines on the control unit.
4. Unscrew the fastening nuts -2-, lift up the control unit and detach it.
Installing front control unit
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
1. Engage the front control unit in the body and screw down with the fastening nut -2-. M6: 7.2 ft. lbs.