Boxster S (987) F6-3.2L (2005)
Retaining screw
Draining oil for final drive
Warning: Risk of scalding from hot oil
--> Let the oil cool down
--> Wear personal protective gear (goggles, gloves)
1. Place oil collection pan under the transmission.
2. Unscrew fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and loosen
fastening screw.
Loosening screw for halfshaft flange
3. Remove the halfshaft flange.
Information:
^
The coolant line holder and coolant line can be pulled down slightly for easier access to screw no. 3.
^
Use a Torx socket wrench insert with a minimum length of 120 mm to loosen or tighten screw no. 5.
4. Screw out lid screws in the sequence -12 to 1-.