Boxster S (987) F6-3.2L (2005)
1. Insert line from below into engine compartment.
2. Insert line into evaporator line and secure using the fastening screw -3-. - Tightening torque: 14 Nm (10.5 ft. lbs.)
3. Push line into the compressor, secure with the fastening screw -1- and clip line into the support. - Tightening torque: 21 Nm (16 ft. lbs.)
4. Insert line in underbody area into rubber mount -6-, close support and secure with fastening nut -5-.
Subsequent work
Subsequent work for compressor/condenser line
Install air-conditioning compressor on engine.
Fill in refrigerant.
Removing and Installing Evaporator-Fluid Tank Line
Removing And Installing Evaporator-fluid Tank Line
Technical values
Preliminary work
Preliminary work line condenser-fluid tank
Draining refrigerant.
Removing cowl panel cover.
Removing the battery.
Removing the condenser-fluid tank line